3.5 Mm Modules And Accessories - Agilent Technologies 85091C Reference Manual

Replaceable Parts

3.5 mm Modules and Accessories

3.5 mm Modules and Accessories
a
Description
Adapters (added with Option 00A)
3.5 mm female to female adapter
3.5 mm male to male adapter
Wrenches
20 mm, 90 N-cm (8 in-lb) torque wrench (supplied with all 3.5
mm kits)
5/16 in, 90 N-cm (8 in-lb) torque wrench (supplied with N4691B,
N4431B, 85093C kits)
Spanner wrench (supplied with N4691B)
1/2 in to 9/16 in open-ended wrench (supplied with N4691B)
Protective End Caps
DB-25 multi-pin connector cap
3.5 mm connector cap (for module)
3.5 mm female connector cap (for adapter)
3.5 mm male connector cap (for adapter)
36-pin connector cap, ESD protected
Gages and Accessories
3.5 mm female pin-depth gage
3.5 mm male pin-depth gage
3.5 mm repair kit with 10 contacts
3.5 mm slotless contacts (pkg. of 10)
3.5 mm slotless contact (1 only)
Other
Electronic calibration module reference guide
Connector care quick reference card (part of reference manual)
USB cable, 1.8 meter
Adapter cable, DB25 to AMP Champ (36-pin)
Storage box for the ECal module and accessories
a. See "Clarifying the Terminology of a Connector Interface" on page
b. A 3.5 mm gage is capable of measuring 3.5 mm and 2.92 mm connectors.
c. See"Printing Copies of On-Line Documentation" on page iv
6-4
b
b
c
Qty Part Number
1 85052-60012
1 85052-60014
1 8710-1764
1 8710-1765
1 08513-20014
1 8710-1770
as required 1252-4690
as required 1401-0214
as required 1401-0202
as required 1401-0208
as required N4693-40002
11752-60105
11752-60106
85052-60049
85052-60050
85052-60051
1 N4693-90001
1 08510-90360
1 8121-0506
1 8121-1047
1 N4693-60042
2.
Chapter 6