N4431B Series Kit Contents; N4431B Options; N469Xa/B Series Kit Contents - Agilent Technologies 85091C Reference Manual

Preparing ECal for Use

N4431B Series Kit Contents

N4431B Series Kit Contents
NOTE The N4431A is no longer available for purchase, but may be returned to
Agilent for service and recertification.
The following table lists the items in each N4431B kit. Option 010 is configured with
3.5 mm -f- connectors on all ports and Option 020 is configured with type-N -f- connectors
on all ports. See Table 1-5 on page 1-7
Table 2-3 N4431B Kit Contents
Qty Description
N4431B Option 010
1 RF Module, 3.5 mm
1 Torque Wrench 20 mm, 0.9 N-m 8710-1764
1 Torque Wrench 5/16", 0.9 N-m
1 USB A-B Cable, 1.8 m
1 Reference Guide
a. Shipped only with N4431B.

N4431B Options

• Option 010 configures the module with 3.5 mm -f- connectors on all ports.
• Option 020 configures the module with Type-N 50 ohm -f- connectors on all ports.
• Option UK6 adds a commercial calibration certificate with measured data.
• Option 150 adds a storage box for the ECal module and accessories.

N469xA/B Series Kit Contents

The N4690/1/6A are no longer available for purchase, but may be returned to
NOTE
Agilent for service and recertification.
The following table lists the items in each N469xA/B kit. The ECal module listed in the
table with each kit describes a unit having a male and female connector (Option M0F). See
Chapter 6 , "Replaceable Parts,"
2-4
for other configurations available.
Part No. Qty Description
N4431-60003 1 RF Module, Type-N 50 ohms
or
a
N4431-60006
1 Torque Wrench 3/4", 1.3 N-m
8710-1765 1 USB A-B Cable, 1.8 m
8121-0506 1 Reference Guide
N4693-90001 - N/A
for the part number of other configurations.
Part No.
N4431B Option 020
N4431-60004
or
N4431-60007
8710-1766
8121-0506
N4693-90001
a
-
Chapter 2