Safety Instructions - Hyundai HCOMBI31 Original Instructions Manual

1. SAFETY INSTRUCTIONS

A. BRUSH CUTTER AND GRASS TRIMMER
 WARNING! When using this type of tool, basic precautions should always be followed to
reduce the risk of fire and injury.
 Read all instructions carefully before attempting to use this product and retain these
instructions. Be familiar with all the operations described in these operating instructions. This
product must be operated by experienced users.
 Inexperienced users shall first have training in all operations with a professional.
 If you are giving this machine to others, please also provide them with this instructions
manual.
 Read all markings affixed on the product (symbols, stickers, technical data, etc.). The
symbols are explained in this manual.
 Use this machine as described in this instruction manual. It is strictly forbidden to use this
tool for applications other than those described in this manual.
 Failure to follow these instructions can result serious injuries and, in some cases, death.
 This product is intended for private domestic use only. Do not use it for commercial purposes.
 Never let people unfamiliar with these instructions or children use this product.
 National regulations may limit the use of the machine.
 People under the age of 18 must not use this product
 Keep in mind that the operator or user is responsible for accidents or risks to other persons
or their property.
 WARNING: Do not use of the unit when tired, ill or under the influence of alcohol or other
drugs.
 Do not use the tool if you are not in an adequate physical condition.
 This tool is intended for outdoor use. Never use it indoors.
 Secure the machine during transport to prevent loss of fuel, damage or injury; always install
the protection device on the blade, check the cap of the fuel tank, and do not transport the
tool upside down.
 Keep people and animals away from the work area. Children and people who don't know
how to use this tool should not touch it and handle it.
 WARNING: Keep people at least 15 m from the machine during operation.
 Use the product only under daylight or under good artificial light.
 When using the machine, always wear full protective equipment including a protective
helmet, protective mask, hearing protection, ocular protection, gloves, slip-resistant foot
protection and protective clothing. The protective equipment shall be in conformity with the
European norms.
 Wear appropriate clothing. Do not wear loose or unbuttoned clothes. Do not wear jewellery
that may come in contact with moving parts. If you have long hair, tie them down and wear
an appropriate safety helmet.
 Do not operate the product with damaged guards or shields not in place.
 Keep hands and feet far away from the cutting parts at all times and especially when
switching ON/OFF the tool.
 Do not use the tool in an area where ventilation is poor. Gas emissions can cause injury.
 Do not work when it rains and in bad weather. Do not use the tool in damp locations.
 Do not use the tool in the presence of flammable liquids or gases.
 Keep the work area clear. Before working, inspect the work area and remove any materials
or objects that could cause accidents.
 Do not force the tool.
 Use only accessories and guards supplied or recommended by the manufacturer. The use of
3