Hyundai HCOMBI31 Original Instructions Manual page 11

 Do not attempt to insert the saw into a pre-existing notch. Always make a new notch.
 Pay attention to moving branches or other forces that could close a notch and pinch or
hinder the chain.
 Do not attempt to cut a branch with a diameter greater than the cutting length of the chain
saw.
 Always switch off the tool, let the chain completely stop before making any adjustments,
maintenance, cleaning or repairs.
 The chain must remain sharp and taut. Regularly check the tension of the chain.
 Only use replacement parts and original accessories.
 Use only the manufacturers specified replacement guides and chains. Incorrect replacement
guides and chains may cause chain breakage and / or rebound.
 Check that there are no obstacles or electrical wires hidden in the work area.
 Immediately stop the device if an abnormal level of vibration has been detected. In case of
damage to the blade, it is necessary to change the complete set of blades.
 Use the device only if all protective devices are mounted. Do not use the device with faulty
protective equipment. Do not modify the unit.
 Do not work with the tool when it rains, in bad weather or in a damp environment. Do not use
the machine when there is a risk of thunderstorms and storms.
 Only work outdoors, under daylight or under artificial lighting.
 Always carry the appliance by its handle
 Tie long hair in a way to prevent them from coming into contact with the blades. Do not wear
jewellery and loose clothing when operating the machine.
 The appliance should never be used near people, especially children and pets. Stop the
operation immediately if this condition is not met. In all cases, ensure a safe area of at least
15 meters around the work area.
 The operator is responsible for accidents caused to others.
 Always take a stable working position. Make sure about your step on the slopes. Take
extreme caution when working on slopes.
 Take regular breaks to reduce the risk of fatigue.
 Never leave the machine unattended.
 The device must always be used fully assembled and secured.
 Store the tool with its blade guard and out of the reach of children
 Never use an incomplete or unauthorized tool.
 Clean and maintain the tool before storage (see the chapters on this manual). Bring
maintenance after each use according the instructions of this manual. Improper maintenance
can reduce the lie of the tool, bring bad results and wear the tool and its accessories.
 Check the tool regularly and before each use to observe any impact or damage.
Residual risks
Even if you use this product in compliance with all safety requirements, the potential risks of
injury and damage remain. The following hazards may arise in the structure and design of this
product:
- There are harmful health consequences resulting from the emission of vibrations if the
product is used for long periods of time or not properly managed and properly maintained.
- There is risk of injury and property damage due to attachments or broken the sudden impact
of hidden objects when using cutting.
- Risk of injury to persons and property caused by flying objects.
- Prolonged use of this product exposes the operator to vibration and can produce so-called
"white finger" disease. To reduce the risk, wear gloves and keep your hands warm.
11