Table of Contents
Advertisement
f. Hedge trimmer
There is no installation for the hedge trimmer; its tube can be directly installed on the main unit.
Extension tube
The provided extension tube can be installed for the hedge trimmer operation.
Loosen the screw located on the tube of the hedge trimmer.
-
Insert the extension tube in the tube of the hedge trimmer. Ensure that the hole of the extension
-
tube is well aligner with the screw (see the arrow on the tube)
Tighten the screw.
-
Insert the extension tube to the main unit as explained on point b.
-
Adjusting of the working angle
NOTE: Always fit the blade cover
Pull both locking ratchet and the locking pin to disengage them from their respective
-
notches.
Adjust the cutting head to desired working angle.
-
Lock the ratchet and the locking pin.
-
Ensure that they both firmly into position in their notches.
-
g. Pole pruner
Assembly of the chain guide and chain
Remove the safety screw and remove the cover.
-
Pass the chain on the chain guide. The chain must be in the direction as shown
-
below. Make sure that the chain is well inserted in the groove of the chain guide.
19
Advertisement
Table of Contents
