Table of Contents
Advertisement
-
Never refuel indoors.
-
Never store the hedge trimmer or fuel container inside where there is an open flame,
such as near a water heater.
-
If fuel is spilled, do not attempt to start the power source, but move the hedge trimmer
away from the spillage before starting.
-
Always replace and securely tighten the fuel cap after refueling.
-
If the fuel tank is drained, this should be done outdoors.
f) If the cutting mechanism strikes any foreign object or the hedge trimmer starts making any
unusual noise or vibration, shut off the power source and allow the hedge trimmer to stop.
Disconnect the spark plug and take the following steps:
-
inspect for damage;
-
check for, and tighten, any loose parts;
g) have any damaged parts replaced or repaired with parts having equivalent specifications.
h) Wear ear protection.
i)
Wear eye protection.
j)
In case of emergency, stop the hedge trimmer; release the trigger, switch off the tool with the
ON/OFF button. Let it completely stop and be cool before any intervention.
Operation
Use the tool for the intended purpose and follow these provided instructions for use and
maintenance
a) Stop the engine before:
-
cleaning or when clearing a blockage,
-
checking, carrying out maintenance or working on the hedge trimmer,
-
adjusting the working position of the cutting device,
-
Leaving the hedge trimmer unattended.
b) Ensure that the hedge trimmer is correctly located in a designated working position before
starting the engine.
c) While operating the hedge trimmer, always ensure that the operating position is safe and
secure, especially when using steps or a ladder.
d) Do not operate the hedge trimmer with a damaged or excessively worn cutting device.
e) To reduce fire hazards, keep the engine and silencer free of debris, leaves and excessive
lubricant.
f) Always ensure that all handles and guards are fitted when using the hedge trimmer. Never
attempt to use an incomplete hedge trimmer or one fitted with an unauthorized modification.
g) Always use two hands to operate a hedge trimmer fitted with two handles.
Maintenance and storage
a) When the hedge trimmer is stopped for servicing, inspection or storage, shut off the power
source, disconnect the spark plug wire from the spark plug and make sure all moving parts
have come to a stop. Allow the hedge trimmer to cool before making any inspections,
adjustments, etc.
b) Store the hedge trimmer where the fuel vapour will not reach an open flame or spark. Always
allow the hedge trimmer to cool down before storing.
c) When transporting or storing the hedge trimmer, always fit the cutting device transport guard.
Additional instructions
Never allow children to use the hedge trimmer.
7
Advertisement
Table of Contents
