Installation - Eneo IND-32F0016P0A Quick Installation Manual

Installation

Step 1:
Remove the plastic base press the release
clip towards the camera, it will flex slightly�
Turn back anti-clockwise as illustrated above
to release�
Step 3: Re-attach the camera to the fitting plate
A: Remove two screws in the cover plate; and insert the memory card to the camera
B: Push holder back to original fixed position�
Note:
• Memory card faces towards the camera, so that the pins contact with the contact connections in the slot�
• The reset button on the bottom is activated using a small pin, which you can press inside hole shown
as the above picture�
Step 2:
Use fitting plate to mark holes for the attach-
ment pack, attach to surface�
EN
9