Quick Network Setup - Eneo IND-32F0016P0A Quick Installation Manual

Quick Network Setup

1� After the camera is connected to the network, start 'eneo Site Manager' tool
(downloadable from www�eneo-security�com)�
2� You will get a list of cameras connected to the local network� Highlight your cam-
era in the list and open a context menu with a click of the right mouse button�
3� Select the „Set IP Address [dhcp / static]" option to open a window for setting the
cameras IP properties� When you are done click the „OK" button to update the
camera settings�
4� By default the camera is set to DHCP� If there is no DHCP server present in the
network the camera will fall back to a default IP address after a while� In this
scenario please only add one camera at a time to the network to avoid conflicts
due to identical IP addresses�
The network camera's default IP address is: 192�168�1�10�
5� Right clicking the device name in the eneo Site Manager will bring up the con-
text menu� Use the 'Open Device Web Site' option to access the camera�
6� The web viewer login page will open up in your default web browser�
In case of Microsoft Internet Explorer install Active-X named VIDEOR E� Hartig
GmbH according to the instruction at the bottom of the browser�
7� The default user name is admin
8� Set password�
Attention:
In the first time accessing the web of the camera, you have to set an admin password to activate your
device� The interface as shown in Figure below will be popped up�
EN
11