DEEP SEA ELECTRONICS DSE8610 MKII Operator's Manual page 3

Amendments List Continued
Amd. No. Comments
Corrected imperial distances.
Updated J1939-75 Specification, Applicable Standards and DSE Four Steps to
5 Synchronising
Added Additional Droop Commissioning Screen, MSC Connect DSE8610s Screen,
Droop and Load Demand Scheme Operation, DSE Steps to Successful Loadsharing.
Added: Power De-Rate, New MSC screens, new PLC Instruments screens, Simulate
6
Injection Testing, Fault Ride Through, updates in the FPE & Running Editor...
Updated to module firmware V7.0, features include: Load Demand Compatibility
7
option, CAN AVR comms, and more...
8 Added: new UL Requirements & part numbering
9 Updates in the UL table
Updated to module firmware V7.7, features include: connecting to DSE2610 Remote
10
Display through the Ethernet or RS232.
Typeface: The typeface used in this document is Arial. Care must be taken not to mistake the upper-case letter I with the numeral 1. The numeral
1 has a top serif to avoid this confusion.
DSE8610 MKII Operator Manual
Page 3 of 246 057-254 ISSUE: 10