DEEP SEA ELECTRONICS DSE8610 MKII Operator's Manual page 176

Fault
2131 ID 1 to 4 Analogue
Input A to J High
2131 ID 1 to 4 Analogue
Input A to J Low
2131 ID1 to 4 Digital Input
A to J
2133 ID 1 to 4 Analogue
Input A to H High
2133 ID 1 to 4 Analogue
Input A to H Low
Analogue Input A to D
(Digital)
Auto Sense Fail
Continued over page...
057-254 ISSUE: 10
Protections
Description
NOTE: Due to module configuration the alarm message
that appears on the display may be different. For further
details of module configuration, refer to DSE Publication: 057-
238 DSE8610 MKII Configuration Suite PC Software Manual.
The module detected that an analogue input value of a DSE2131
had risen above the Flexible Sensor High Alarm Trip level.
NOTE: Due to module configuration the alarm message
that appears on the display may be different. For further
details of module configuration, refer to DSE Publication: 057-
238 DSE8610 MKII Configuration Suite PC Software Manual.
The module detected that an analogue input value of a DSE2131
had fallen below the Flexible Sensor Low Alarm Trip level.
NOTE: Due to module configuration the alarm message
that appears on the display may be different. For further
details of module configuration, refer to DSE Publication: 057-
238 DSE8610 MKII Configuration Suite PC Software Manual.
The module detected that a digital input configured to create a fault
condition on a DSE2131 expansion module became active and the
appropriate LCD message displayed.
NOTE: Due to module configuration the alarm message
that appears on the display may be different. For further
details of module configuration, refer to DSE Publication: 057-
238 DSE8610 MKII Configuration Suite PC Software Manual.
The module detected that an analogue input value of a DSE2133
had risen above the Flexible Sensor High Alarm Trip level.
NOTE: Due to module configuration the alarm message
that appears on the display may be different. For further
details of module configuration, refer to DSE Publication: 057-
238 DSE8610 MKII Configuration Suite PC Software Manual.
The module detected that an analogue input value of a DSE2133
had fallen below the Flexible Sensor Low Alarm Trip level.
NOTE: Due to module configuration the alarm message
that appears on the display may be different. For further
details of module configuration, refer to DSE Publication: 057-
238 DSE8610 MKII Configuration Suite PC Software Manual.
The module detected that an analogue input configured as a
digital input to create a fault condition became active and the
appropriate LCD message is displayed.
The module detected that the output voltage of the generator had
risen above the Over Voltage During Auto Sensing Trip level
during starting whilst attempting to detect which alternative
configuration to use.
Page 176 of 246