DEEP SEA ELECTRONICS DSE8610 MKII Operator's Manual page 208

Section Parameter As Shown On Display
Timers LCD Page Timer
Scroll Delay
Engine Pre Heat Timer
Engine Post Heat Timer
Engine Cranking
Engine Cranking Rest
Engine Safety On Delay
Engine Warming at Idle (Idle Running)
Engine Idle Ramp Up (Idle Running Off)
Engine Warming
Engine Cooling
Engine Overspeed Overshoot
Engine Fail To Stop Delay
Battery Under Voltage Warning Delay
Battery Over Voltage Warning Delay
Return Delay
Generator Transient Delay
Communications RS232 Port Baud Rate
RS232 Port Slave ID
RS485 Port Baud Rate
RS485 Port Slave ID
Schedule Schedule
Schedule Bank 1 Period
On Load / Off Load / Auto Start Inhibit,
Week, Start Time, Run Time and Day.
Selection (1 to 8)
Schedule Bank 2 Period
On Load / Off Load / Auto Start Inhibit,
Week, Start Time, Run Time and Day.
Selection (1 to 8)
057-254 ISSUE: 10
Front Panel Configuration
Page 208 of 246
Values
0 h 0 m 0 s
0 h 0 m 0 s
0 h 0 m 0 s
0 h 0 m 0 s
0 m 0 s
0 m 0 s
0 m 0 s
0 m 0 s
0 m 0 s
0 h 0 m 0 s
0 h 0 m 0 s
0 m 0 s
0 m 0 s
0 h 0 m 0 s
0 h 0 m 0 s
0 h 0 m 0 s
0 s
1200 / 2400 / 4800 / 9600 / 14400 /
19200 / 28800 / 38400 / 57600 /
115200
1
1200 / 2400 / 4800 / 9600 / 14400 /
19200 / 28800 / 38400 / 57600 /
115200
1
Active / Inactive
Weekly / Monthly,
Press the Tick button to begin
editing then up or down when
selecting the different parameters.
Weekly / Monthly,
Press the Tick button to begin
editing then up or down when
selecting the different parameters.