Omcan BE-IT-0015A Instruction Manual page 5

Ensure the machine is off during cleaning, maintenance and lubrication.
Return the safety guards to their original position after cleaning, maintenance or lubrication of the
machine.
Both mechanical and electrical repairs must be carried out by qualified staff, i.e. by a person who has
familiarity with and has the right qualifications for installation, assembly and use of the machine.
• Remove the plug from the electrical power supply during machine maintenance.
• Only qualified and well-instructed staff can carry out mechanical or electrical operations.
• The machine must be used by one person at a time.
• Do not remove the guards when the machine is on.
DANGER DUE TO MECHANICAL COMPONENTS
• The safety guards protect all the parts. Keep them on during normal operations. All the guards are
controlled by a micro. An error will display when they are not closed, therefore the machine will not work.
• There is a risk of injuring yourself during machine maintenance, particularly when parts are removed
without complying with safety standards.
• There is no danger if the machine is used correctly.
DANGER DUE TO ELECTRICAL COMPONENTS
• Such danger is not covered because the components are not directly accessible. Broken or damaged
cables or electrical components must be promptly replaced by specialist staff or an electrician.
DANGER DUE TO HYDRAULIC COMPONENTS
• Such danger is not contemplated because the components withstand at least five times 40 bar pressure.
DANGER DUE TO LACK OF HYGIENE
• If the precautions in the MAINTENANCE chapter are not strictly complied with, there may be serious
hygiene-related danger.
DANGER DUE TO NOISE
• The average noise level measured near the work station is under 70 decibels.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as
possible.
Safety and Warranty
5