User Settings - Hisense E6431C Instructions For Use Manual

User settings

You can adjust the volume of the acoustic signal, duration of acoustic alarm, and automatic lock
settings.
The parameter settings menu can be activated within two minutes after the appliance is connected
to the power mains, by touching and holding the pause (Stop&Go) key for around 3 seconds while
the appliance is switched off.
The first parameter "Uo" will appear on the timer display, indicating the volume (loudness) of acoustic
signals. Press the timer key (M,N) to select the type of parameter.
Acoustic signal and alarm volume (loudness) "Uo"
The following values can be set:
00 on the display = off (does not apply to alarm and error acoustic signal)
01 on the display = minimum volume
02 on the display = medium volume
03 on the display = maximum volume (default)
A short acoustic signal will be sounded upon every change, with the newly set volume.
Acoustic alarm duration "So"
The following values can be set:
05 on the display = 5 seconds
1,0 on the display = 1 minute
2,0 on the display = 2 minutes (default)
Child safety lock "Lo"
If the automatic lock function is activated in the user settings mode, the cooking hob will be
automatically locked every time it is switched off.
00 on the display = off (default)
01 on the display = on
Uo acoustic signal and alarm volume (loudness)
So alarm duration
Lo Automatic lock
The currently set value will appear on the right cooking zone power level
displays. The value can be adjusted by pressing the
the front right cooking zone. All parameters can be confirmed and stored
by pressing and holding the pause (Stop&Go) key for 2 seconds. Then,
a short beep will be heard. If you do not wish to store the new parameter
settings, close the user settings mode by pressing the on/off key.
or keys for
17