Table of Contents
Advertisement
Never immerse a running propeller into a filled container.
Increase the agitator propeller rotation slowly.
Personal safety equipment (breathing apparatus, goggles, gloves, etc.) must be worn when
working with material that is dangerous to health.
Never point the spraying equipment at people or animals.
OPERATION
The diaphragm pumps run automatically, i.e. during operational shutdown (no material drawn out of
pressure system) pumping will stop.
It is therefore recommended that the pump be disconnected from the air supply overnight or at the
weekend and, if possible, material pressure be reduced by withdrawal (after the air is disconnected.)
This can be achieved by using a spray device for example.
Before long-term shutdown, e.g. company holidays, pumps carrying paint should be flushed. In
order to avoid the hardening of paint residue the detergent should remain in the pump during
shutdown.
We recommend an alkyl sulfon acidic detergent for long-term shutdowns, e.g. "ASE".
Consult the material supplier concerning the compatibility of the detergent.
NITRO thinners or cleanser should not be used as detergent.
MAINTENANCE AND INSPECTION, REPAIR
MAINTENANCE AND INSPECTION
003.175-DP DIAPHRAGM PUMPS REQUIRE LITTLE MAINTENANCE.
15
B.6.50.80-B-GB
Advertisement
Table of Contents
