Table of Contents
Advertisement
Bar
Fig. 6
TOOL LIST
Allen Screw
Open-ended
DIN 911
Spanner
DIN 895
SW 4, SW 5,
SW 8, SW 13,
SW 6, SW 8
SW 19, SW 32
Open-ended Spanner DIN 895
SW 32 Compressed air hose line (compressed air accessories)
SW 41 Screw fitting for suction and pressure connections
2 bars are used as wall fixings. This type of fixing
Profile sheet
is provided for flat walls such as machine walls.
A wall fixing made of 2 bars and profile sheets is
recommended for uneven walls (brickwork).
Fig. 7
The frame is used to support the diaphragm pump on an
even floor. The bearing surface should be as even as
Frame
possible and level (slope < 3°).
All setup positions have the suction connection of the
diaphragm pump facing downward, and the pressure
connection facing upward. A connection facing in any
other direction will impair the pump function.
Screws and dowels of all fixtures supplied by us conform
to technical product description
B.17.90.01-P .
Fig. 8
Flat-nosed
Pliers
pliers
DIN 5248
DIN 5256 C
Length 140
ring
9
Gripper
Article No.
70630 002002
for retaining
Special tool
12 - 25
Assembly bolt
Article No.
70640 001002
Special tool
Table 1
B.6.50.80-B-GB
Advertisement
Table of Contents
