Table of Contents
Advertisement
5. Long press：
Long press the button + (Up) or - (Down) to set the door to the target CLOSE
limit position then release the buttons.
/
Short press the SET button once to store the CLOSE limit position, then the door
drive will automatically open and close the door to store the door weight and
spring balance conditions.
Note:
a.
If a system selection error occurs during the setting process, please
click
，Execute enter to exit the setting, and then execute the
first operation again.
b. Active or change any stand alone function, refer to the below
"FUNCTION TABLE MENU".
7
Advertisement
Table of Contents
