Table of Contents
Advertisement
Fine adjustment of the close
limit position
[Press '+' from (1.2)]
exit to the menu
the next function menu, or press the
cancel button to exit the function setting.
Remark:
Default
a.
Select
means the limit position moves
further in the OPEN DOOR direction.
b.
Select
means the limit position moves in the
door center direction.
Press and hold SET button for about
6 seconds to enter main menu until
"0.-" appears on the display then
release the button.
Press "+" till "1.-" appears on the
display.
Press SET then "1.0" appears on the
display.
Press "+" till "1.3" appears on the
display,
Press SET to enter, digital flashing
display
adjust the number displayed on the digital
display between
. Select the target parameter, press
SET to confirm the function option, then
exit to the menu
Remark:
Default
a.
Select
means the limit position moves in the
CLOSE DOOR direction.
b.
Select
means the limit position moves in the
12
，Continue to set
to
, which
to
, which
; Use the +/- buttons to
...
.
to
, which
to
, which
to
Advertisement
Table of Contents
