Table of Contents
Advertisement
Query the remaining cycles
of maintenance alarm
alarm function is closed (factory default)
Press SET to enter the function menu,
digital displays
default).
Adjust the stalls from
500 cycles per stall.
Cycles-calculation method is 500*N,
N=01—15. A=10；F=15
e.g.
means：1*500=500 cycles；
means：2*500=1000 cycles；
means：10*500=5000 cycles；
means：15*500=7500 cycles
Press and hold SET button for about
6 seconds to enter main menu until
"0.-" appears on the display then
release the button.
Press "+" till "8.-" appears on the
display.Press
appears on the display.
Press "+" till "8.1" appears on the
display , Press SET to enter the
Query the remaining cycles of
maintenance alarm
Press SET to enter the function query,
the digital will circulated display
the cumulative loop display 3 times, the
query display will exit.
Remark:
a.
Running cycles counter will not be
cleared even after the door drive is
31
(factory
then
by buttons +/-.
SET then " 8.0 "
, then after
to
Advertisement
Table of Contents
