Table of Contents
Advertisement
MENU5
Infrared Beam & Light Curtain
Function
the AUTO CLOSE function is effective and
starts timing.
Condition
stops at any position when opening, the
AUTO CLOSE function is effective and
starts timing.
Condition
the door is open, as long as it is not at
the close limit position, it will
automatically close.
Remark:
Infrared Beam & Light Curtain Function
17
means: After the door
means： No matter where
a. If the infrared function is
turned on, the AUTO CLOSE timing
will stop when the infrared is blocked
by an obstacle. After the obstacle
removed,
it
will
previous timing and automatically
close the door.
b. When the door is about to
close, the courtesy light flashes for
warning.
c. When the door is about to
close, the warning light flashes to
warn.
d. Note: The flashing time of
the warning light follows the courtesy
light.
e. The AUTO CLOSE function
can only be used when the safety
protection device is used correctly
Press and hold SET button for about
6 seconds to enter main menu until
"0.-" appears on the display then
release the button.
Press "+" till "5.-" appears on the
display.
Press SET into the Infrared Beam &
Light Curtain function
continue
the
Advertisement
Table of Contents
