Quick Setting To Guide The Drive Works By "Aas - ForceDoor BASE70 Instructions And User Manual

QUICK SETTING TO GUIDE THE DRIVE WORKS
BY "AAS" (Auto adaptive system)
Important:
 "AAS" will automatic identify the door condition to define a best program
for its "Open/ Close speed", "Soft start/ soft stop ranges" and "Force sensitivity".
 A quick setting guide the drive will work properly after below operation.
All of the indicator lights are light up constantly for "SL,HL,VL" and then off.
1.Long press：
Then release the button until one of the indicator lights flashes.
over 3 seconds to
enter into RAIL
SYSTEM
selection
2.Short press：
The corresponded light flashes for "SL,HL,VL"
/
to select the
corresponded

RAIL SYSTEM of
the door.


3.Short press：
The corresponded indicator light is constant on for "SL,HL,VL"
Then, the digital display shows
to confirm the
selected Rail
System
4. Long press： Long press the button + (Up) or - (Down) to set the door to the target OPEN
limit position, then release the buttons.
/
Short Press the SET button once to store the open limit position, the digital displays
SL: Standard lift sectional doors with cylindrical cable drum
HL：High lift sectional doors with cylindrical-conical cable drum
VL：Vertical lift sectional doors with conical cable drum
to start the CLOSE travel limit setting.
6
to start the OPEN travel limit setting.