ForceDoor BASE70 Instructions And User Manual page 23

MENU6
Partial open position setting
PB1 Port function setting(NO)
Terminals for Extra Function Setting







You can continue to set the next function
menu. Or press the RETURN button to exit
the function setting.
Remark:
It means that the partial open door
position is 50% of the full travel limit.




21
Press and hold SET button for about
6 seconds to enter main menu until
"0.-" appears on the display then
release the button.
Press "+" till "6.-" appears on the
display.
Press SET then appears "6.0" on the
display
Press SET enter into the Partial open
position setting
Press SET to enter the function
menu, digital quickly display
，Then it flashes
Adjust the stalls from
by buttons+/-.（9 stalls
represent 10%-90% of the door travel
limit）
Press SET to confirm and exit to the
menu .
(default).
Press and hold SET button for about
6 seconds to enter main menu until
"0.-" appears on the display then
release the button.
Press "+" till "6.-" appears on the
display.
Press SET then appears "6.0" on the
display
Press "+" till "6.1" appears on the
display.
，
to