ForceDoor BASE70 Instructions And User Manual page 13

Reversal Distance Ignorance Setting
(Fine adjustment of the pre-close
limit position- for DW）
[Press '+' from (1.0)]
Fine adjustment of the open
limit position
[Press '+' from (1.1)]

Press "+" till "1.1" appears on the
display.

Press SET to enter the Reversal
Distance Ignorance Setting
The digital flashes
stalls from
+/ - ，Press SET to confirm the function
option, automatically exit to the menu
function menu, or press the RETURN
button to exit the function setting.
Remark: According to the door rail system and the
size of the cable drum, the adjustment
range of each setting is between 20 mm
-50 mm (Based on the different cable
drum installed).
Default
The calculation format is like this:
[8] * 2* 2.2mm

Press and hold SET button for about
6 seconds to enter main menu until
"0.-" appears on the display then
release the button.

Press "+" till "1.-" appears on the
display.
 Press SET then "1.0" appears on the
display.

Press "+" till "1.2" appears on the
display,
Press SET to enter, digital flashing
display
adjust the number displayed on the digital
tube between
. Select the target parameter, press
SET to confirm the function option, then
11
， Adjust the
to
to continue setting the next
is about 35mm.
；Use the +/- buttons to
...
by button
to