Advertisement
Materials Included:
Part # Description
1
2" x 3 1/2" x 43" Posts
2
1 3/4" x 3 1/2" x 41 3/4" / 46 3/4" Top rail
3
1 3/4" x 3 1/2" x 41 3/4" / 46 3/4" Bottom rail
4
7/8" x 3" x 38 1/2" Pickets
7/8" x 3" x 36 1/4" Pickets
7/8" x 3" x 35" Pickets
7/8" x 3" x 34 1/4" Picket
5
Steel hinge set
6
Steel gate latch set
7
Hardware kit (Includes):
7/8" x 3" Picket caps
2" x 3 1/2" External post caps
2" x 3 1/2" Post insert caps
3/4" Self-tapping stainless screws
Tube of vinyl cement
* The small gate fits openings on the Nantucket II
arbor, Ashbury arbor, and Manchester deluxe.
* The large gate fits openings on the Newport
arbor, Fairfield arbor, and Yorkshire arbor.
(Small gate fits 44" & 45" opening, Large gate fits 49" & 50" opening)
(In 1 box)
(Fig. 2)
Gate layout.
Cottage Picket Gate
Assembly & Mounting Instructions
General Information:
- Read instructions through carefully before
beginning assembly.
- Identify each component from material list.
- When assembling components, place on a
non-abrasive surface to avoid scratches.
- Do not use excessive force when assembling
components.
- In the event of missing or defective parts,
please call our customer service department
Tools Required:
Qty.
- Cordless drill with #2 Robertson
bit and 1/8" drill bit
2
- 3/8" socket wrench
1
- Phillips screwdriver
1
- 11/16" or adjustable wrench
2
- Tape measure and pencil
2
- Square
2
- Level
1/2
1
1
7/8
2
2
16
1
Part 1
Part 5
Post insert
cap
(small & large gate widths)
Product dimensions & Part
Nantucket II Arbor
Picket cap
External
post cap
Part 4
Part 6
Part 2
Part 3
42" or 46"
(Fig. 1)
identification.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for New England Arbors Cottage Picket Gate
Summary of Contents for New England Arbors Cottage Picket Gate
- Page 1 Cottage Picket Gate Assembly & Mounting Instructions General Information: - Read instructions through carefully before beginning assembly. - Identify each component from material list. - When assembling components, place on a non-abrasive surface to avoid scratches. - Do not use excessive force when assembling components.
- Page 2 Lay out one of the posts (part 1) and insert the bottom rail (part 3) into the hole closest to the end of the post. Make sure the holes in the rail are facing towards the second hole in the post. Insert the top rail (part 2) into the second hole in the post.
- Page 3 Using two screws, fasten the opposite end of the top rail to the post as shown in step 4. Center the gate latch (part 6) at the end of the top rail, as close to outside edge of the post as you can. Fasten the latch to the post using the screws provided in the latch kit.
- Page 4 Place the remaining half of the hinge against the inside wall of the arbor post. Make sure the distance measured between the hinges on the gate is equal to the distance between the hinges on the arbor post. Attach the hinge to the post, as in step 12. Lift the completed gate and line up the hinges.
Need help?
Do you have a question about the Cottage Picket Gate and is the answer not in the manual?
Questions and answers