Advertisement
Quick Links
Materials Included:
Part # Description
1
4" sq. x 54" Posts
2
2" x 3 1/2" x 44 1/2" Top rails
3
2" x 3 1/2" x 43 1/2" Bottom rails
4
7/8" x 3" x 29 1/4" Pickets
7/8" x 3" x 30" Pickets
7/8" x 3" x 31 1/2" Pickets
7/8" x 3" x 32 3/4" Pickets
7/8" x 3" x 34 1/4" Pickets
7/8" x 3" x 36 1/4" Pickets
7/8" x 3" x 38 1/2" Pickets
7/8" x 3" x 41" Pickets
5
4" sq. Post caps
6
4" sq. Trim caps
7
5" sq. Base moldings
8
2" x 3 1/2" Rail mount brackets
9
Hardware kit (Includes):
7/8" x 3" Picket caps
3/4" Self-tapping stainless screws
Rail end spacers (1/4" & 1/2")
Tube of vinyl cement
Materials (Optional):
- Two bags of pre-mix concrete *
* Recommended for extra stability.
* Wings designed for the Nantucket II Arbor,
but will also fit most other models.
General Information:
- Please refer to the set of instructions which is
relevant to the product you have purchased.
- Read instructions through carefully before
beginning assembly.
- Identify each component from material list.
- When assembling components, place on a
non-abrasive surface to avoid scratches.
- Do not use excessive force when assembling
components.
- In the event of missing or defective parts,
please call our customer service department
(In 1 box)
Quantity
2
2
2
4
2
2
2
2
2
2
2
2
2
2
39"
8
18
32
4
1
(Not Included)
Cottage Picket Wings
Assembly & Mounting Instructions
Tools Required:
- Cordless drill with #2 Robertson bit
- Tape measure
- Level
- Shovel
- Pencil
Nantucket II
Picket cap
Part 4
Part 1
Part 2
Part 3
49"
Product dimensions & Part
identification.
44 1/2"
(arbor opening)
(Fig. 2)
Post layout for installation.
Arbor
Part 6
Part 8
49"
152"
Part 7
(Fig. 1)
44 1/2"
Part 5
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for New England Arbors Cottage Picket Wings
Summary of Contents for New England Arbors Cottage Picket Wings
- Page 1 Cottage Picket Wings Assembly & Mounting Instructions General Information: - Please refer to the set of instructions which is relevant to the product you have purchased. - Read instructions through carefully before beginning assembly. - Identify each component from material list.
- Page 2 Lay out one of the posts (part 1). Measure 8” from one end of the post and put a mark. Center the rail mount bracket (part 8) on the post, with the open end at the 8” mark. Using two screws, fasten the bracket to the post as illustrated.
- Page 3 Break open one bundle of pickets (part 4). Start with the 41” picket at the furthest end of the rails, and insert each one in descending order, ending with two 29 1/4” pickets at the post. Make sure the tabs on the end of the pickets “snap” into the bottom rail.
- Page 4 Apply a bead of vinyl cement to the underside of each post cap (part 5). To ensure proper attachment to the post, apply the cement to all internal “contact” points of the cap. Place the caps onto the end of each post and push down firmly, until the end of the post “bottoms out”...
Need help?
Do you have a question about the Cottage Picket Wings and is the answer not in the manual?
Questions and answers