Appendix C - Manufacturer's Emc Declarations - MAGSTIM BiStim2 Operating Manual

APPENDIX C – MANUFACTURER'S EMC DECLARATIONS
The Magstim Bistim² is intended for use in the electromagnetic environment specified below. The customer or the user of the equipment
should assure that it is used in such an environment.
Emissions Test
RF emissions Group 1
EN55011
RF emissions Class B
EN55011
Class B
Harmonic Emissions (by equipment
IEC 61000-3-2 type)
Voltage fluctuations/
flicker emissions Complies
IEC 61000-3-3
The Magstim Bistim² is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The
customer or the user of the Magstim Bistim² can help prevent electromagnetic interference by maintaining a minimum distance between
portable and mobile RF communications equipment (transmitters) and the Magstim Bistim² as recommended below, according to the
maximum output power of the communications.
Rated maximum output
power of transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m) can be
estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter
in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from
structures, objects and people.
© The Magstim Company Limited
Guidance and Manufacturer's Declaration – Electromagnetic Emissions
Compliance
The Magstim Bistim² must emit electromagnetic energy in order to perform its intended
function. Nearby electronic equipment may be affected.
The Magstim Bistim² is suitable for use in all establishments other than domestic and those
directly connected to the public low-voltage power supply network that supplies buildings
used for domestic purposes.
Guidance and Manufacturer's Declaration – Electromagnetic Immunity
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
3,5
]  P
d = [
V
1
Where V = 3
1
0,117
0,369
1,167
3,689
11,667
Electromagnetic environment - guidance
m
80 MHz to 800 MHz 800 MHz to 2,5 GHz
3,5
]  P
d = [ d = [
E
1
Where E = 3 Where E
1
0,117
0,369
1,167
3,689
11,667
26
Magstim BiStim²
Operating Manual
7
]  P
E
1
= 3
1
0,233
0,738
2,333
7,379
23.333
MOP02-EN-02