Appendix C - Emc Immunity And Emmisions - MAGSTIM 3190-00 Operating Manual

APPENDIX C - EMC IMMUNITY AND EMMISIONS

C1. The Magstim Rapid
Guidance and Manufacturer's Declaration – Electromagnetic Emissions
The Magstim Rapid
customer or the user of the equipment should assure that it is used in such an environment.
Emissions Test
RF emissions
EN60601-1-2
RF emissions
EN60601-1-2
Harmonic Emissions
EN60601-1-2
Voltage
fluctuations/ flicker
emissions
IEC 61000-3-3
Guidance and Manufacturer's Declaration – Electromagnetic Immunity
The Magstim Rapid
disturbances are controlled. The customer or the user of the Magstim Rapid
electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the Magstim Rapid
according to the maximum output power of the communications.
Rated maximum output
power of transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance
d
in metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where
is the maximum output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
© The Magstim Company Limited
2
2
System is intended for use in the electromagnetic environment specified below. The
Compliance
Group 1 The Magstim Rapid
order to perform its intended function. Nearby electronic
equipment may be affected.
The Magstim Rapid
Class A establishments other than domestic and those directly connected
to the public low-voltage power supply network that supplies
buildings used for domestic purposes.
Class A
(by equipment
type)
Complies
2
System is intended for use in an electromagnetic environment in which radiated RF
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
3,5
d
= [ ] 
V
1
Where V = 3
1
0,117
0,369
1,167
3,689
11,667
Electromagnetic environment - guidance
2
System must emit electromagnetic energy in
2
System is suitable for use in all
2
System as recommended below,
m
80 MHz to 800 MHz
3,5
P d P
= [ ] 
E
1
Where E = 3
1
0,117
0,369
1,167
3,689
11,667
26
Magstim 2nd Generation Coils
Operating Manual
2
System can help prevent
800 MHz to 2,5 GHz
7
d P
= [ ] 
E
1
Where E = 3
1
0,233
0,738
2,333
7,379
23.333
MOP04-EN-03
P