Rear Panel - MAGSTIM BiStim2 Operating Manual

Rear Panel

3.2
5
6
3.2.1
The Power switch allows the power supplying the unit to be switched on (labelled I) or off (labelled
O).
3.2.2
The trigger input is used to synchronise the Magstim Bistim² system to an external trigger input. This
is only functional on the master unit. Please see Appendix B for more information.
3.2.3
This socket is used to connect the pneumatic foot switch to the Magstim Bistim² system. The foot
switch can be used to trigger the instrument when one of the trigger buttons located on the coil is
also pressed. The instrument will continuously charge and discharge if the trigger buttons are
pressed and held. The foot switch socket is only functional on the master unit when.
© The Magstim Company Limited
2
1
Power * (1)
Isolated Interface* (2)
Foot Switch Socket* (3)
3
Master
Slave
Figure 3.4: Blank Rear Panel.
9
Magstim BiStim²
Operating Manual
4
MOP02-EN-02