3.3.4 Connections (bottom of instrument)
A square key is provided to open the instrument front panel locks. The two locks are located on
the right side of the instrument on the top and bottom panels (number 9 in
The front panel can be easily pivoted to the left as shown below. To retain the instrument
waterproof tightness, make sure the seal is clean and in good condition before closing the front
panel.
1 - Power cable
2 - USB-B 4 pin connector (reserved for
manufacturing)
3 - Ethernet cable gland
4 - Sensor connection
5 - USB-A host connector for mass storage device
Note: The type of power cable connection will vary depending on the instrument specification.
Figure 7 Wall and pipe mount connection
panel
6 - External pressure sensor connection
7 - Input/Output 2 cable gland
8 - Input/Output 1 cable gland
9 - Keylock
Installation
Figure 7
below).
23