Section 3
3.1 Unpacking the Instrument
Figure 3
Items Supplied with SensorI
1
1.
SOLITAX sc Sensor
2.
User Manual
3.1.1 Function Check
Installation
DANGER
Only qualified personnel should conduct the tasks described in this section of the
manual.
After unpacking, both components should be checked for any transport damage and a
short function check performed prior to installation.
To perform a function check, connect the sensor to the display unit and power the unit.
Shortly after the unit is plugged in, the display is activated and the instrument switches to
the measurement display. Measured values taken in air is meaningless.
If no messages appear in the lower part of the display, the function check is
then complete.
2
3
3.
Factory Test Certificate
4.
Wiper Set (for 5 changes) LZX050
4
9