Selecting The Cameras To Be Operated - Panasonic AV-UHS5M6G Operating Instructions Manual

Remote camera link functions

Selecting the cameras to be operated

By connecting remote cameras to AV-UHS500, it is possible
to control remote cameras from AV-UHS500 using the
positioner and encoder.
1 Assign the remote cameras connected to XPT. Refer
to "Remote camera control method settings" for
information on how to assign.
DISP
2 Press the button to make it turn green.
CAM
KEY1 KEY2 KEY3 DSK1 DSK2
F/S F/S F/S F/S F/S
AMBER : FILL / GREEN : SOURCE
AUX BUS DELEGATION
AUX
XPT2
3 Select the remote cameras assigned in Step 1 as the
CAM bus sources.
p The selected buses turn green.
The remote cameras connected via NDI to AV-UHS500
that can be selected as CAM bus sources are the
following inputs:
· IN-A1 to IN-A4
· IN-B1 to IN-B4
p Control of remote cameras is available only when
either the [CAM PMEM] screen or [CAM CONT]
screen is being displayed.
4 By moving the positioner left, right, up, and down,
you can control pan and tilt of the remote cameras
connected to AV-UHS500.
Lights
5 Turning [Z] left and right adjusts the control speed for
pan/tilt and operates the zoom.
You can switch the control speed and zoom operation
by pressing [Z].
DISP
AUX1 AUX2 AUX3 AUX4
CAM
AUX /DISP SOURCE
Z ALARM
ZOOM
LINK
PRJ
SD Card
MENU
HOLD
X/Y
BKGD PAN/TLT
PATT
KEY
PATT
VMEM
CAM
CONT
MV1 PGM
MV2 PVW
SHIFT
22