Panasonic AV-UHS5M6G Operating Instructions Manual page 27

Remote camera link functions

F1 F2
 
Input source information display
A
Camera status
Power On
Pan & Tilt Alarm
Fan Alarm
Other Alarm
Camera IP Connection Error
No IP Address for Camera
Now Connecting to Camera...
Standby
Z-Dial
B
P-T Speed
Zoom
Focus
Iris
[F1]
C
[F2]
D
[F3]
E
[F5]
F
0
50
100
p Thumbnails are not displayed when the remote camera is connected via NDI and the camera control method is NDI.
p It is not possible to set the pan/tilt operating time for all of the remote cameras. Refer to the user guide for the remote
camera for details.

F3 F4 F5
 
The following information is displayed.
The CAM bus source material name/Machine Name (Source Name)
The name set on the remote camera is displayed in Machine Name (Source Name).
Normal situation
When a problem is detected with the pan/tilt of the camera
When a problem is detected with the fan of the camera
When a problem is detected with something other than the pan/tilt or fan of the camera
When the camera failed to connect via IP
When the IP address has not been set for the camera corresponding to the input signal
When connecting to the camera for the first time after switching the input signal
When the camera is on standby
Indicates the application for [Z].
Each time you press [Z], operation switches between P-T Speed and Zoom.
Indicates the status of the control speed of pan/tilt. "Fast" indicates fast operation and "Slow"
indicates slow operation.
Indicates the zoom position. "Tele" indicates the telephoto side and "Wide" indicates the wide
side.
Indicates the focus position. "Far" indicates the far side and "Near" indicates the near side.
"Auto" is displayed when auto focus is on.
Indicates the iris status. "Open" indicates that the iris is open and "Close" indicates that the iris
is closed.
"Auto" is displayed when the auto iris is on.
Zoom moves to the telephoto end at a constant speed when the button is pressed.
Zoom moves to the wide end at a constant speed when the button is pressed.
Turn left and right to operate the zoom. Zoom to the wide end with a counterclockwise turn and
to the telephoto end with a clockwise turn.
Changes the preset speed.
Minimum speed (When set to the pan/tilt operating time： 99)
Default value (When set to the pan/tilt operating time： 20)
Maximum speed (When set to the pan/tilt operating time： 1)
27