Schedule Mode - Salus RT510RF Full User Manual

6.2 Schedule mode

In this mode, user can set the schedules for thermostat (temperature setpoints for specific periods of time). There are two types of schedules: 5/2 (working
days+weekends) and 7d (7 idividual schedules for each day separately). Schedule type can be choosen by parameter d04 (please refer to Installer mode
section). Schedule is divided by 6 time programs (which means user can have maximum of 6 temperature changes during a day). To programm a schedule
its necessary to fill in all 6 programs. To set schedule please follow steps below:
1
Press the SET button to start
3
Press SELECT to confirm.
5
Press SELECT to confirm.
7
Press SELECT to confirm.
9
Press SELECT to confirm.
TEST / PAIRING
SELECT SET
programming.
TEST / PAIRING
SELECT SET
TEST / PAIRING
SELECT SET
TEST / PAIRING
SELECT SET
TEST / PAIRING
SELECT SET
2
Use the
day / days from which you want to
SELECT SET
4
TEST / PAIRING
SELECT SET
Use the
hour for the program #1.
6
SELECT SET
TEST / PAIRING
SELECT SET
Use the
minutes for the program #1.
8
SELECT SET
TEST / PAIRING
SELECT SET
Use the
temperature for the program #1.
10
SELECT SET
TEST / PAIRING
SELECT SET
Follow steps 4-9, to define programs 2-6.
Press SET button at the end of programming to
confirm and save all the settings.
TEST / PAIRING
SELECT SET
or button to select
start programming.
TEST / PAIRING
TEST / PAIRING
SELECT SET
or button to set the
TEST / PAIRING
SELECT SET TEST / PAIRING
or button to set the
TEST / PAIRING
TEST / PAIRING
SELECT SET
or button to set the
TEST / PAIRING
TEST / PAIRING
SELECT SET
15