Selecting Wired or Wireless LAN
Set whether to connect the machine to the network using a wired or wireless LAN.
If you want to switch from wired LAN to wireless LAN, you can make the setting during the procedure for connecting
to wireless LAN.
Connecting to a Wireless LAN(P. 55)
* You cannot connect to a wired LAN and wireless LAN at the same time.
Use the operation panel to configure the settings. On the operation panel, you can also configure the settings by
pressing [Menu] in the [Home] screen
computer.
Administrator privileges are required.
Touch Panel Model(P. 52)
5 Lines LCD Model(P. 52)
Touch Panel Model
1
On the operation panel, press [Menu] in the [Home] screen.
2
Press [Preferences]
If the login screen appears, enter the System Manager ID and PIN, and then press [Log In].
Manager ID and PIN(P. 5)
3
Select [Wired LAN] or [Wireless LAN].
➠
The message [Settings configured.] appears.
Next, connect to the wired or wireless LAN.
Connecting to a Wired LAN(P. 54)
Connecting to a Wireless LAN(P. 55)
When Switching between Wired and Wireless LAN
●
Any installed drivers must be uninstalled and then reinstalled.
For details about uninstalling and installing drivers, see the driver manual at the online manual site.
https://oip.manual.canon/
5 Lines LCD Model
1
On the operation panel, select [Menu] in the [Home] screen and press
Screen(P. 113)
2
Press [Preferences]
Setting Up
[Preferences]. You cannot configure the settings using Remote UI from a
[Network]
[Select Wired/Wireless LAN].
[Network]
52
[Home] Screen(P. 113)
[Select Wired/Wireless LAN]
94LS-017
System
.
[Home]
.