Canon imageCLASS MF273dw User Manual page 407

Specify whether to use the LPD protocol.
If the LPD protocol is used, you can also set the time from the start of reception standby, after print data reception is
canceled, to the timeout.
[LPD Print Settings]
[Off]
[On]
[RX Timeout]
1 to 5 to 60 (min.)
[RAW Settings]
[Menu] [Preferences]
Specify whether to use the RAW protocol.
If the RAW protocol is used, you can also set the time from the start of reception standby, after print data reception is
canceled, to the timeout.
[RAW Print Settings]
[Off]
[On]
[RX Timeout]
1 to 5 to 60 (min.)
[WSD Settings]
[Menu] [Preferences]
Specify whether to use the WSD protocol. You can specify this setting for each of the functions that use the WSD
protocol. Configuring LPD, RAW, or WSD(P. 343)
[WSD Print Settings]
[Use WSD Print]
[Off]
[On]
[Use WSD Browsing]
[Off]
[On]
[Use Multicast Discovery]
[Off]
[On]
[WSD Scan Settings]
[Use WSD Scan]
[Off]
[On]
[Use Computer Scan]
[Off]
[On]
Settings Menu Items
Configuring LPD, RAW, or WSD(P. 343)
[Network] [TCP/IP Settings]
Configuring LPD, RAW, or WSD(P. 343)
[Network] [TCP/IP Settings]
398