●
When the slider is displayed, press
Entering Characters Using Keys Displayed on the Operation Panel (5 Lines
LCD Model)
Use the on-screen keys to select the letters and numbers you want to enter and then press
You can enter letters, numbers, and symbols.
Changing the Character Type
Press [Switch Entry Mode]
Moving the Cursor
Select [
] or [
Deleting Characters
Press [
]
If [
] or [
] is not displayed, pressing [
Entering Spaces
Press [Space]
You can also enter a space by moving the cursor to the end of the characters and pressing [
Basic Operations
or
to set the value.
, select the character type and then press
] on the screen and then press
on the screen to delete one character.
.
Using the Slider to Set Values(P. 120)
.
]
deletes all the characters.
125
to enter the characters.
.
]
.