Canon imageCLASS MF273dw User Manual page 295

- HTTP [Use HTTP](P. 399)
- IPP printing [IPP Print Settings](P. 399)
- mDNS (IPv4) [mDNS Settings](P. 395)
- mDNS (IPv6) [mDNS Settings](P. 395)
- Network Link Scan
Setting the Functions and Security to Be Used with AirPrint
AirPrint uses the following protocols:
● IPP (printing and sending faxes)
● Network Link Scan (scanning)
The protocol to use varies with the function. Therefore, you can restrict the available functions by disabling the
protocols. In addition, you can configure the settings to encrypt communication with TLS and configure IPP
authentication when using a protocol.
Configure these settings using Remote UI from a computer. You cannot use the operation panel to configure the
settings.
Administrator privileges are required.
Required Preparations
● When encrypting communication with TLS, specify the key and certificate to use for TLS encrypted
communication.
1
Log in to Remote UI in System Manager Mode.
2
On the Portal page of Remote UI, click [Settings/Registration].
Remote UI(P. 352)
3
Click [Network Settings]
[Edit].
➠
The [Edit IPP Print Settings] screen or [Edit Network Link Scan Settings] screen is displayed.
4
Configure the IPP or Network Link Scan settings.
When Restricting the Functions to Use
Clear the [Use IPP Printing] or [Use Network Link Scan] checkboxes.
● When you clear the [Use IPP Printing] checkbox, printing and sending faxes with AirPrint are no longer
possible.
● When you clear the [Use Network Link Scan] checkbox, scanning is no longer possible with AirPrint.
When Encrypting Communication with TLS
Select the [Allow Only When Using TLS] or [Use TLS] checkbox.
When Setting IPP Authentication
Select the [Use Authentication] checkbox, and set the user name to be used for IPP authentication using
single-byte alphanumeric characters.
Linking with Mobile Devices
[Network Link Scan Settings](P. 399)
Using TLS(P. 311)
[IPP Print Settings] or [Network Link Scan Settings]
Starting Remote UI(P. 350)
286
Portal Page of