Canon imageCLASS MF273dw User Manual page 106

● You can also configure the setting to receive faxes automatically after the machine rings for a certain
period of time.
4
Press [Apply].
➠
The [Connect Telephone Line] screen is displayed.
Step 4: Connecting to Telephone Line
Use the supplied telephone cord to connect the machine to the telephone line.
When using a telephone, connect it to the machine.
1
Connect the supplied telephone cord to the telephone line jack (LINE) on the
machine and the telephone line connector on the wall.
Connect the telephone to the external telephone jack (EXT.) on the machine.
● When connecting a telephone with fax function, be sure to disable the fax auto receive setting on the
telephone.
● Depending on the type of telephone connected to it, the machine may not be able to send or receive faxes
properly.
2
On the screen confirming that you want to exit the Fax Setup Guide, press [Yes].
3
Restart the machine.
➠
The settings configured in the Fax Setup Guide are applied, and the type of telephone line is configured
automatically.
If the Type of Telephone Line Is Not Configured Automatically
● Configure the type of telephone line manually.
* If you do not know the type of your telephone line, contact your telephone company.
Making an Alert Sound When the Handset Is Not Properly Set on the Cradle
● You can select whether the machine makes an alert sound when the handset of a telephone connected to
the machine is not properly set on the cradle.
Log in to Remote UI
the [Off-Hook Alarm] checkbox and adjust the volume
Setting Up
[Switch to Auto RX](P. 445)
Restarting the Machine(P. 106)
[Settings/Registration]
[Select Line Type](P. 438)
[TX Settings] [Fax TX Settings]
[OK]
97
[Edit] Select