Heidolph Hei-PLATE Mix'n'Heat Expert Operating Instructions Manual page 114

Operation
Available buttons
Delete button: Delete profile or favorite
Save profile
Load favorites
Start profile (changes to stop profile during operation)
Activate/deactivate continuous loop operation
On saving a profile, the following input screen appears by default:
➜
Assign a unique name to each profile (it can be be adjusted at any time).
–
Use a push-and-rotary wheel to select an available character and confirm by pressing
a push-and-rotary wheel.
–
Confirm the changes with
retain an existing profile in the memory under its previous name.
CAUTION
On switching off the device, the last loaded profile remains active.
Eventual modifications on an existing profile will not be reset automati-
cally, even on switching off the device. This means that the most recently
used profile will be switched to active, if necessary with modified values,
when starting the device again.
• If necessary, load an existing profile again to undone modifications on
• After a restart or after switching on the device again and before
Save
to adopt them. If applicable, select
the stored parameters.
working through the latest active profile again, check the set values if
necessary!
114
Cancel
to