Sage Oracle Instruction Booklet page 21

PAGE HEADER..... OPERATING YOUR NEW APPLIANCE
While ' A UTO START' is displayed on the
LCD, press the SELECT dial. Turn the
SELECT dial to 'On' or 'Off' . Press SELECT
dial to set.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
Turn the SELECT dial to the left or right to
select the desired Auto Start time. Turning the
SELECT dial faster or slower will change the
rate of adjustment. When the required time
has been reached, press the SELECT dial to
set. A small clock icon will be displayed on
the LCD when the Auto Start function has
been programmed.
AUTO OFF
This function sets how long the machine will
stay turned on before it automatically turns
off. It can be set for 5 mins, 10mins or 20mins
until Auto Off activates.
While ' A UTO OFF' is displayed on the
LCD, press the SELECT dial. Turn the
SELECT dial to the desired time then press
SELECT dial to set. Machine will beep once
to confirm selection.
TAMP SET
This function is for advanced use only.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
Adjusting tamp parameters allows for fine
tuning of coffee tamping force and polishing
duration. While 'TAMP SET' is displayed on
the LCD, press the SELECT dial. The tamp
force setting will flash. Turn SELECT dial to
setting 1–9.
Press SELECT dial to set and the current
polishing time will flash. Turn SELECT dial to
select 2–10 seconds. Press SELECT dial to set.
Machine will beep once to confirm settings.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
21