Sage Oracle Instruction Booklet page 24

PAGE HEADER..... OPERATING YOUR NEW APPLIANCE
'Hrd3' will flash on screen. Machine is
now in Water Hardness mode. See
+
'Water Hardness (Hrd3)' to set.
Descale (dESc)
Select this feature to access the step by step
descale procedure on the LCD. Refer to page
34 for the accompanying instructions.
Water Hardness (Hrd3)
Determine water hardness with the supplied
water hardness test strip. Refer to 'Setting
Water Hardness', page 13.
Rotate SELECT dial to the required setting
from 'Hrd1' (softest water) to 'Hrd5' (hardest
water). Press SELECT dial to set. Machine will
beep once to confirm selection.
Setting water hardness will determine the
regularity of the 'DESCALE' and 'CHANGE
FILTER' alerts.
Units (SEt)
Set units to metric or imperial. Rotate SELECT
dial to the desired unit. Press SELECT dial
to set. Machine will beep once to confirm
selection.
LCD Backlight (Lcd)
Adjust the LCD brightness/contrast.
Rotate SELECT dial to the desired brightness.
Press SELECT dial to set. Machine will beep
once to confirm selection.
Spotlights (SPOt)
Adjust the brightness of the LEDS lighting
the drip tray area. Rotate SELECT dial to the
desired brightness. Press SELECT dial to set.
Machine will beep once to confirm selection.
24
Steam Temperature (StEA)
Adjust the steam boiler temperature, which in
turn controls steam pressure. Rotate SELECT
dial to the desired temperature. The default is
130˚C. Press SELECT dial to set. Machine will
beep once to confirm selection.
Air Pump Delay (Air)
This function is for advanced use only. Delay
the operation of the air pump during automatic
milk texturing. Rotate SELECT dial to the
POWER
desired delay time.
The default setting is 02 seconds. Press
SELECT dial to set. The default temperature
which the air pump turns off will be displayed.
Rotate SELECT dial to the desired temperature.
Press SELECT dial to set. Machine will beep
once to confirm selection.
Sound (Snd)
Adjust the audible alerts. Rotate SELECT dial
to the desired setting. Select between off (OFF),
low (Lo) or high (Hi). Press SELECT dial to
set. Depending on the selected setting, the
machine may beep once to confirm selection.
Fan Control (FAn)
Adjust the speed of the internal cooling fan.
Rotate SELECT dial to the desired fan speed.
Select between Silent (SILt), Standard (StNd)
or cool (CooL). Press SELECT dial to set.
Machine will beep once to confirm selection.
Disable Clean Me! Alert (Cln)
Disables the 'CLEAN ME!' alert. Rotate
SELECT dial to on (On) or off (OFF). The
default setting is on. Press SELECT dial to set.
Machine will beep once to confirm selection.
12h or 24h Clock (CLoC)
Display time in 12h or 24h format. Rotate
SELECT dial to the desired unit. Press SELECT
dial to set. Machine will beep once to confirm
selection.