Leister Technologies AG
10 Electronic circuit boards
Caution! The following measurement sometimes requires the tool to be connected
to line/mains. Insure tool is disconnected from line/mains before any work is com-
menced!
10.1 Function check
According to test procedure (chapter 14)
10.2 Visual inspection
Check electronic circuit boards for visual error indications:
Scortch marks, destroyed components
Expanded/swelled parts
10.3 Replacement of electronic circuit board HCU
Repair instructions
Ghibli AW
Revision: B
Disconnect tool from the line/mains!
Loosen PT pan head cap screws KA35x20
(4x), remove heater tube and mica tube
Heating element may be removed now;
gasket will be extracted with heating ele-
ment from blower housing top
Caution: Do not damage thermocouple!
Loosen PT pan head cap screws KA35x20
(4x) and remove blower housing top
QM
INN_FO_29
Page
28 / 48
Created
13.04.15 PRI
Released
20.04.15 PRI
Modified
02.07.18 PRI