Tool Assembling - Leister GHIBLI AW Repair Instructions

Leister Technologies AG

8.2 Tool assembling

Repair instructions
Ghibli AW
Revision: B
Check mechanical parts for abrasion before
assembling (chapter 12)
Fix 4 black flex wires (interconnection of
electronic circuit board PTU and electronic
circuit board HMI) in their supports
Fix power supply (blue and brown flex wire)
to attachment ring
Fix 2 black flex wires to motor in their sup-
ports
During assembling make sure, the attach-
ment ring is correctly positioned in the guid-
ing rails of the housing shells
Assemble all components and motor to the
bottom housing shell
Cover with top housing shell and tighten PT
pan head cap screws KA35x20 (6x)
Assemble blower housing top to print adapt-
er front
Make sure groove and cam fit properly
Tighten PT pan head cap screws KA35x20
(4x) to cross
QM INN_FO_29
Page 20 / 48
Created 13.04.15 PRI
Released 20.04.15 PRI
Modified 02.07.18 PRI