Select Service Menu (Enter Service Code); Quit Service Menu - Leister GHIBLI AW Repair Instructions

Leister Technologies AG

6.1 Select service menu (enter service code)

Requiring a service code prevents the user to enter the service menu accidentally.

6.2 Quit service menu

Repair instructions
and
and
Ghibli AW
Revision: B
Push e-Drive control button and connect tool
to line/mains at the same time
For 3 seconds "Setup" appears. Within this
time release e-Drive control button and turn
it 360° in both directions
After correct manipulations first menu item
pops up
There is no e-Drive control button manipula-
tion to quit the service menu; disconnect tool
from the line/mains (unplug the tool)
QM INN_FO_29
Page 10 / 48
Created 13.04.15 PRI
Released 20.04.15 PRI
Modified 02.07.18 PRI