Electric Components; Power Supply Cord - Leister GHIBLI AW Repair Instructions

Leister Technologies AG

9 Electric components

Caution! Disconnect tool from the line/mains before any work is commenced!

9.1 Power supply cord

 Check power supply cord for mechanical damages (jacket insulation, sharp kink, plug)
 Check cord guard, strain relief and terminals
 Check power supply cord for short circuit/break by using a continuity checker/buzzer
Replace power supply cord if it shows mechanical damage, short circuit or break; replace
cord guard as well if necessary.
Repair instructions
Ghibli AW
Revision: B
Visual inspection, continuity checker/buzzer
Disconnect tool from the line/mains!
Loosen PT pan head cap screws KA35x20
(2x) at blower housing top
Loosen PT pan head cap screws KA35x20
(6x) at housing shell
Remove top housing shell
QM INN_FO_29
Page 22 / 48
Created 13.04.15 PRI
Released 20.04.15 PRI
Modified 02.07.18 PRI