C Setting The White Balance (White Balance); Auto Trace White Balance (Atw) - Sanyo VCC-MC500 Instruction Manual

Color ccd camera
Table of Contents

Advertisement

Camera Settings (CAMERA)

C Setting the white balance (WHITE BALANCE)

Sets the white balance according to the shooting conditions.
The following methods are available for setting white balance.
• Auto trace white balance (ATW) <Initial setting>
• One-push automatic white balance (AWC)
• Fixed white balance (3200/5600/FLUO)
• Manual white balance (MWB)
SYNC
IRIS
WHITE BALANCE
BLC
SHUTTER
APERTURE
AGC
GAMMA
DAY/NIGHT
PRESET
MENU
b Auto trace white balance (ATW)
Even when light sources of the target object change, automatic
adjustment assures capture of most suitable colors.
Use the joystick lever (xy) to select [WHITE BALANCE] and use the
lever (vw) to select "ATW y".
Auto trace white balance settings are completed when "ATW y" is
selected. When an extremely bright light source is in the target
object, use the mask pattern so that the light source will not be
detected.
Placing mask patterns
To place a mask pattern over specific light sources in the target
object, do the following.
Mask patterns can be placed only when registering a
view setting file in the CAMERA VIEW screen.
1
While "ATW y" is selected by using the joystick
lever (vw), press the [ENTER] button.
The ATW SETTING screen appears.
ATW SETTING
MASKING
2
Use the joystick lever (xy) to select [MASKING],
use the lever (vw) to select "ON y", and press the
[ENTER] button.
The ATW MASKING screen appears. A mask pattern is
displayed in the top left of the screen.
ATW MASKING
CONTINUE (y)
INT
AUTO
y
ATW
y
OFF
OFF
ON
y
ON
y
0.45
AUTO
y
OFF
BACK
ON
y
3
Use the joystick lever (xy or vw) to move a mask
pattern to the light source area to be masked, and
press the [ENTER] button.
This sets the mask pattern.
ATW MASKING
CONTINUE (y)
If you want additional mask patterns to be placed, repeat the
above procedure.
<To delete the mask pattern>
Use the joystick lever (xy or vw) to place a mask pattern over
the mask pattern to be cancelled, then press the [ENTER]
button.
4
Use the joystick lever (y) to move a mask pattern to
the bottom area of the screen and continue holding
the lever straight down for three seconds.
This completes the mask pattern setting procedure.
After completing setting, use the lever to move the cursor to
[MENU] and select "BACK" or "END".
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vcc-mc600

Table of Contents