Adjusting Back Focus Position; Mirror - Sanyo VCC-HD2500P Manual

4
Deselect the [MANUAL] check box.
Be sure to deselect the check box to prevent the loss of focus due to wrong operation.
The check box is automatically deselected if you switch from the focus adjustment screen to another
screen.
Follow the steps below to reduce the loss of camera focus that may occur when the Day/Night function is enabled.
In [COLOR/B/W], select the back focus position switching mode. When finished, click
then .
BACK
Select the mode suitable for your lens.
AUTO (for lens that does not
support infrared focusing):
FIX (for lens that supports infrared
focusing):
Use the mirror function to electronically flip the displayed subject.
If you installed the camera upside down or intend to monitor the subject in the mirror, configure the following
settings according to the installation environment of the camera.
In [MIRROR], select the desired mirror mode and click
OFF: Disables the mirror mode (normal video).
Flips the video vertically and horizontally.
HV:
H: Flips the video horizontally.
Flips the video vertically.
V:
The configured settings will be applied commonly to "CAM1" and "CAM2" selected under [VIEW].
Adjusts the camera to the last-set back focus position each time
switching to the color/black-and-white video mode occurs.
Fixes the camera to the last-set back focus position regardless of
switching to the color/black-and-white video mode.
SET
Working with Administrator Configuration Screens 35/66
.
SET and