Resetting The Factory Defaults - Honeywell Virtuos 1D User Manual

3. Click on EZConfig-Device Configuration Software.
4. Click on the Software tab. Select EZConfig Cloud For Scanning (online version, must register for access) or
EZConfig for Scanning (to install on your PC, follow the next steps).
5. To install on your PC, when prompted, select Save File, and save the files to the c:\windows\temp directory.
6. Once you have finished downloading the file, exit the web site.
7. Using Explorer, go to the c:\windows\temp file.
8. Double click on the Setup.exe file. Follow the screen prompts to install the EZConfig-Scanning program.
9. If you've selected the defaults during installation, you can click on Start Menu-All Programs-Honeywell-EZConfig-
Scanning and select EZConfig for your browser.

Resetting the Factory Defaults

This selection erases all your settings and resets the scan engine to the original factory defaults. It also disables all
plugins.
If you aren't sure what programming options are in your scan engine, or you've changed some options and want to restore the
scan engine to factory default settings, first scan the Remove Custom Defaults bar code, then scan Activate Defaults. This
resets the scan engine to the factory default settings.
Remove Custom Defaults
The Menu Commands, beginning on page 9-4 list the factory default settings for each of the commands (indicated by an aster-
isk (*) on the programming pages).
Activate Defaults
8 - 3