Step 4: Verify Operation - Emerson Rosemount 3051S Series Quick Installation Manual

Quick Installation Guide
00825-0100-4802, Rev BA
June 2007
S 4: V
TEP ERIFY
Operation can be verified in four locations: at the device via the LCD, by using the 375 Field
Communicator, at the Gateway via the 1420 Wireless Gateway's integrated web server, or
™
via AMS Suite: Intelligent Device Manager.
Local Display
The LCD will display the PV value at the same rate as the transmit rate, but no faster than
Product Discontinued. Click here for the new WirelessHART document.
once per minute. Refer to the Rosemount 3051S Wireless manual for error codes and other
LCD messages. Press the Diagnostic button to display the TAG, Device ID, Network ID,
Network Join Status and Device Status screens.
Searching for Network
n e t w k
a - s r c h
375 Field Communicator
For the Wireless enabled HART transmitter (option code X), use the "3051S WPT" DD.
Function
Network
Figure 1. 375 Field Communicator Connections
1420 Wireless Gateway
In the 1420's integrated web server, navigate to the Explorer>Status page. This page will
show whether the device has joined the network and if it is communicating properly.
NOTE:
It may take several minutes for the device to join the network.
O
PERATION
Joining Network
n e t w k
j o i n g
Key Sequence
1, 4, 3, 1
P/N 00753-9200-0010 P/N 00753-9200-0010
COMM COMM
Rosemount 3051S Wireless
Connected with
1 Parent
n e t w k
1 p a r n t
Smart Power, Network ID, Set Join
Key, Radio State
P/N 00753-9200-0010
COMM
Connected with
2 Parents
n e t w k
2 p a r n t
Menu Items
7