Verify Operation - Emerson Rosemount 248 Quick Start Manual

Quick Start Guide

3.0 Verify operation

Operations can be verified in four locations: at the device via the local display,
using the Field Communicator, at the Gateway's integrated web interface, or
™
using AMS
3.1 Local display
During normal operation, the LCD display will display the PV value at the
configured update rate.
For Device Status screens, see LCD screen messages on Rosemount 248 Wireless
Reference Manual.
3.2 Field Communicator
For HART Wireless transmitter communication, a Rosemount 248 Wireless DD is
required. To obtain the latest DD, visit the Emerson
Emerson.com/Rosemount/Device-Install-Kits
The communication status may be verified in the wireless device using the
following Fast Key sequence.
Table 1. Fast Key Sequence
Function
Communications
3.3 Gateway
In the integrated web interface from the Gateway, navigate to the Explorer>Status
page. This page shows whether the device has joined the network and if it is
communicating properly.
Note
It may take several minutes for the device to join the network.
Note
If the device joins the network and immediately has an alarm present, it is likely due to
sensor configuration. Check the sensor wiring (see
configuration (see
8
Suite Wireless Configurator or AMS Device Manager.
Fast Key sequence
3, 4
Table 3 on page
Menu items
Comm Status, Join Mode, Available Neighbors,
Advertisement, Join Attempts
Figure 7 on page
12).
™
Easy Upgrade site at:
11) and the sensor
April 2019