Mounting; Table 12 Mounting Arm Adapter Ordering Options - Beckhoff CP39 Series Manual

Commissioning
4.2

Mounting

Extreme environmental conditions
Extreme environmental conditions can cause damage to the device.
• Avoid extreme environmental conditions.
• Protect the device against moisture.
The CP39xx Control Panel is designed for installation on a mounting arm system. The environmental
conditions specified for operation must be observed (see chapter 8 Technical data [} 48]).
You can find the device dimensions in the current drawings on our website at: https://
download.beckhoff.com/download/Technical_Drawings/Industrial_PC/Control_Panel/CP39xx.
In the basic configuration, there is a connection block with four M6 threaded holes on the rear side of the
housing. This can be used to install the control panel on a mounting arm system.
The control panel can optionally be ordered with the Beckhoff mounting arm adapter. The following ordering
options are available:
Table 12: Mounting arm adapter ordering options
Order identifier
C9900-M750
C9900-M751
C9900-M752
C9900-M753
C9900-M761
C9900-M763
The C9900-M750, -M751, -M752 and -M753 options are mounted directly ex factory. You must mount the
two options C9900-M761 and -M763 yourself (see chapter 4.2.1 Mounting the mounting arm adapter
[} 31]).
Depending on the ordering option, the mounting arm adapters mounted ex factory are either oriented
upwards or downwards. In addition, you have the option of ordering the device with a mounted push button
extension (see chapter 3 Product overview [} 9]). With the push button extension, the mounting arm adapter
can also be oriented either upwards or downwards. All mounting arm adapters have a locking screw to
prevent rotation (1). Figure 19 shows the control panel with all four mounting arm adapter options mounted
ex factory, for example.
28
NOTE
Design
Rotatable and tiltable mounting arm adapter on Control Panel CP3912 to
CP3924 for Rittal and Rolec mounting arm systems with 48 mm tube from
above
Rotatable and tiltable mounting arm adapter on Control Panel CP3912 to
CP3924 for Rittal and Rolec mounting arm systems with 48 mm tube from
below
Rotatable and tiltable mounting arm adapter on Control Panel CP3912 to
CP3924 with push button extension C9900-Gxxx for Rittal and Rolec mounting
arm systems with 48 mm tube from above
Rotatable and tiltable mounting arm adapter on Control Panel CP3912 to
CP3924 with push button extension C9900-Gxxx for Rittal and Rolec mounting
arm systems with 48 mm tube from below
Rotatable and tiltable mounting arm adapter for CP39xx-0000 with option
C9900-M362 and CP39xx-0010 with option C9900-M338, clamping lever to
lock the tilt
Rotatable and tiltable mounting arm adapter for CP39xx-0000 with option
C9900-M362 and CP39xx-0010 with option C9900-M338
Version: 3.6 CP39xx